CAD Standards - Line Types

Displays when you select the CAD Standards > Line Styles tab in the Options dialog. It lets you to define/edit new or existing line types to be used when drawing components in the drawing. By default three different line types are included with the install:

rw2D_continuous - continuous line used for all raceway components not overlapping other components.
rw2d_dashed - dashed lines used for raceway components which overlap other components.
rw2d_dashdot - dash-dot lines used for raceway components partially overlapping other components.

Setting	Description
Property	n the Property column click the arrow next to the hatch ID to expand the list of properties to be defined as shown: The property values can be defined using the following methods depending on what type of value is required: Type a value directly into the field Select from a drop down list of predefined values. Use the arrow buttons in the Value field to adjust the value in increments.
Value	In the Value column, enter a value for the adjacent Property field using the descriptions above.
Add	Click to add a new line style to the list then define the name and properties for the style.
Delete	Click to delete the selected line style.
OK	Saves the changes and closes the Options dialog.
Cancel	Closes the Options dialog without saving any changes.
Apply	Applies any changes while keeping the Options dialog open.